Home > Products Guide > DynAmp BRP
DynAmp BRP
The new, BRP rectifier protection system is a specialized modular system designed to sense reverse and over current events on high current DC bus bars. This next generation system is Dynamp’s next-generation technology developed to replace the older BCMR systems. BRP utilizes a pair of sensors, mounted on opposite sides of the DC bus bar. These advanced sensors incorporate 30 years of experience and new proprietary magnetic shielding technology to dramatically improve signal to noise ratios and practically eliminate chances of false alarms.
Key Features
Minimizes impact of external magnetic fields to reduce false alarms.
Dramatically improves signal to noise ratio for high dependability.
Simplifies installation and allows application to a wide variety of bus bar sizes.
24V logic reverse alarm output
Latching reverse alarm output with LED indication and manual reset button
Two user adjustable over current alarms with dry contact relay outputs
Power relay for direct activation of protection equipment
Dramatically simplified as compared to BCMR
BRP Versions
BRP: Sensor pair with 24V signal output including 30m signal cable and connector
BRP L: Sensor Pair + Latching function Module. Adds output signal latching and LED indication to the reverse current detection function. This ensures that users are able to identify which specific rectifier caused the reverse current trip, which must be manually reset before continuing. DIN rail mount.
BRP PE: Sensor Pair + Latching & Over Current Module. In addition to BRP L latching functions, each with their own dry contact relay output. DIN rail mount.
Optional Power Relay
Special high-power, electro-mechanical relay to provide reliable switching of higher power loads, particularly those controlled by 120VDC. This optional relay can be directly driven by the BRP reverse current signal in all versions as well as the lighter duty over current relays in the BRP PE version. DIN rail mount.
Optional Universal Power Supply
Provides the main 24V DC power required by all BRP systems in applications where 24V DC is not already available.
Optional IP67 Enclosure
For protecting BRP Modules , Power Relays and Universal Power Supply when installed in demanding environmental conditions
Specifications
BRP: Basic Rectifier Protection
Trip point -7.5kA ±2.5kA
Response time < 1mS
Signal Output Fail-safe Logic +24VDC 100mA max.
drops to 0 VDC upon reverse alarm
returns to +24VDC 200mS after
reverse current event ends
Mains Power 22…26Vdc, 25mA, <1.0W nominal
Protection Output : over-current, short circuit
Power Input : reverse polarity,
over-voltage, ESD
Isolation 5kV bus bar to output
Protection Class IP67
Operating Temp. -20o to +95oC ( -4oF to 203oF)
Storage Temp. -40o to +95oC (-40oF to 203oF)
( higher temp. operation possible
via ‘stand-off’ sensor pair mounting)
Humidity 0-95% non-condensing (max)
Input / Output M12 Receptacle on Master Sensor
Interconnect Cable Right angle M12 plug (one end)
un-terminated (other end)
18AWG, foil shield, FEP Jacket,
30m (98.4 ft)
Sensor Size 140mm x 82mm x 53mm x 2 sensors
(5.5”H x 3.2”W x 2.1”D )
Weight 2.3kg (5 lbs) total ( sensor pair )
Sensor Mounting Screw mount directly to bus
BRP L : Basic Rectifier Protection
with Latching Reverse Current Alarm Module
Adds the following features and specifications to
Basic Rectifier Protection Sensor Set
Signal Output LED indication and reverse alarm
Manual push button required
to clear LED and alarm signal
Mains Power 22…26Vdc, 25mA, (excluding load) <1.0W ( same as Sensor Set )
Signal Input Interconnect cable from Sensor Set to
screw terminals on module
Signal Output Via screw terminals on module
Environmental IP21
Module Size 42 x 99 x 115mm
Mounting Standard DIN rail
BRP PE : Basic Rectifier Protection
With Latching Reverse Current Alarm Module and
and 2 Adjustable Over Current Alarms
Adds the following features and specifications to
Basic Rectifier Protection Sensor Set with
Reverse Current Alarm Latching Module
2 Over Current Alarms Adjustable from 10kA to 120kA
Alarm Contacts SPDT 250VAC / 30VDC 3A
Signal Input Interconnect cable from Sensor
Set to screw terminals on module
Signal Output Via screw terminals on module
Environmental IP21
Module Size 42 x 99 x 115mm
Mounting Standard DIN rail
Option Specifications
Optional Power Relay for Reverse or Over Current Alarms
(specially designed for reliable operation with higher power AC and DC loads )
Response time : <1mS
Power handling : 2A at up to 150VDC / 300VAC
Environmental : IP21
Relay Size 44 x 44 x 77mm high including socket
Optional Universal Power Supply
( provides 24VDC to BRP if not available on-site )
Input : 90…350 VDC and 85…264 VAC 47…440Hz
Output : 24VDC
Environmental : IP21
Module Size 23 x 99 x 115mm
Optional IP 67 Enclosure
( improves IP rating of IP21 rated components )
Size 254mm H x 175mm W x 112mm D
Environmental IP21
Mounting Screw mount directly to wall or panel
Required Ordering Information
Select BRP system version : 1, 2 or 3
1) Basic Rectifier Protection
BRP Specify Item 44304
2) Basic Rectifier Protection with
Latching Reverse Current Alarm Module
BRP L Specify Item 44305
3) Basic Rectifier Protection with
Latching Reverse Current Alarm Module
and 2 Adjustable Over Current Alarms
BRP PE Specify Item 44516
Add Desired Options
Optional Power Relay
( one per alarm output as desired )
Specify Item 44306
Optional Universal Power Supply :
Specify Item 44307
Optional IP 67 Enclosure for Optional Modules, Relays
and Universal Power Supply
Specify Item 44540
Complete BRP Worksheet BEN082